• Member
  • Products
    • What's New
    • Industrial Ethernet Switch
      • Unmanaged Switches
      • PoE Switches
      • Layer 2 Lite Managed
      • Layer 2 Managed Switches
      • Layer 3 Ethernet Switch
      • Rack-Mount Ethernet Switch
      • Card-Type Ethernet Switch
      • Desktop-Type Ethernet Switch
      • EN50155 Railway Ethernet Switch
      • Railway Ethernet Switch (Trackside & Station)
      • IEC 61850-3 Ethernet Switch
      • C1D2/ATEX Switch
      • Optical Fiber Bypass Switch
    • Industrial Media Converter
      • Rack-Mount Modular Media Converter
      • Din-Rail Ethernet Media Converter
      • PoE Ethernet to Fiber Media Converter
      • Ethernet Extender Media Converter
    • Industrial Serial Products
      • Rack-Mount Serial Device Server
      • Serial Device Server
      • Wireless Serial Device Server
      • Serial USB Converters
      • Serial Media Converters
    • Industrial Wireless Access Point
      • Din-Rail Wireless Access Point
      • IP-67 Wireless Access Point
      • EN50155 Wireless Access Point
    • Industrial VPN Router
      • Din-Rail VPN Router
      • Din-Rail 3.5G Cellular Router
      • Din-Rail 4G LTE Cellular Router
      • EN50155 3.5G Cellular Router
      • EN50155 4G LTE Cellular Router
      • IP-67 EN50155 3.5G Cellular Router
      • IP-67 EN50155 4G LTE Cellular Router
    • Industrial M2M Gateway
      • Din-Rail M2M Gateway
    • Management Software & Accessories
      • Open-Vision
      • Fiber Optical Accessories
      • RF Accessories
      • Antenna
      • Power Supply
      • M-Series Cables
      • Serial Cables & Connector
      • Backup Unit
    • Industrial IoT
      • Smart Lighting Controller Series
      • Protocol Gateway
      • LPWAN Gateway
      • IIOT Gateway
      • IIOT Starter kit
    • ORing Cloud
  • Technology
    • Industrial Ethernet Switch
    • Industrial Media Converter
    • Industrial Serial Products
    • Industrial Wireless Access Point
    • Industrial VPN Router
    • Industrial LPWAN Gateway
    • Management
  • Solution
    • Intelligent Transportation System
    • Railway
    • IP Surveillance
    • Smart Grid
    • Oil and Gas
    • Renewable Energy
    • Manufacturing Automation
    • Building Automation
    • In-Vehicle
    • ORing Cloud
    • IIOT
  • Where to buy
    • North America
    • Central America
    • South America
    • Europe
    • Middle East
    • Africa
    • Russia
    • APAC
    • India
  • Support
    • RMA Service
    • ODM Service
    • Warranty Policy
    • Technical Service
    • ORing E-Guidebook
    • Download
    • FAQ
    • Product Inquire
  • News
    • Press Release
    • Global Events
    • Product End of Life / Change Notification
    • ORing Channel
    • E-paper
    • E-paper Subscription
  • About Us
    • Company Profile
    • Product Coverage
    • Quality Assurance
    • Contact ORing
    • Milestone
    • CSR
    • Sitemap
  • ORing-PaaS-Cloud

Products

Home / Products / Industrial Ethernet Switch / PoE Switches / INJ-101GT++-60W Series

INJ-101GT++-60W-24V

INJ-101GT++-60W-24V

Industrial 1-port Gigabit High Power PoE++ Injector, 9 to 57VDC

Inquiry
  • Introduction
  • Specification
  • Order Information
  • Accessory
  • Download

Overview

The INJ-101GT++ PoE Injector series is not only an IEEE802.3at compliant device but also an advanced high power PoE injector. It is intelligent detection that provided 1-ports 10/100/1000Base-T (X) PoE outputs. The device does not turn on power until it detects a valid PoE signature from the PoE devices attached downstream on the Ethernet cable. This protection against damage to non-PoE compliant equipment which may be connected to the Ethernet cable. Therefore, only an IEEE 802.3at/802.3af compliant device can be powered with the INJ-101GT++ PoE Injector. Typically in Gigabit networks the maximum allowable CAT5 cable length is about 100 meters, due to the limitation of the Ethernet standards. The INJ-101GT++ PoE Injector can function with any PoE P.D. equipment which is fully compliant with the IEEE 802.3af/at PoE standards, and provide the DIP switch configurator for High power PoE management.

Features

    • PoE++ Injector for 1x10/100/1000Base-T(X)
    • Fully compliant with IEEE802.3at/802.3af standard
    • Auto protection for Over Voltage Power Input and over current output
    • Supports totallyPower Output up to 60Watts for all ports usage.
    • Support wide range power input, 9 to 57VDC
    • Provided DIP switch configurator for PoE mode management
    • High reliability and rigid IP-30 housing
    • DIN-Rail and Wall Mount Design
Specification
Specifications
ORing Injector Model INJ-101GT++-60W-24V
Physical Ports  
RJ-45 Ethernet Port Input 1
RJ-45 Ethernet Port with P.S.E. Output 1
Operating Voltage  
Input Voltage 9 ~ 57 VDC on 4-pin terminal block
LED Indicators  
Power Indicator PWR / Ready: 1 x LED
Green On: Power is on and functioning Normally.
PoE Indicators 1 x LED
Blue On: PoE Device Link
Off : None PoE Device Detected
Blink (Blue) : Overload present
DIP Switch  
DIP Switch 1/2

DIP Switch 1/2 (OFF): PoE P.S.E set to master and Asyncronize mode

DIP Switch 1/2 (ON) : PoE P.S.E set to syncronize mode(default)
Power  
Input Power 9 ~ 57 VDC on 4-pin terminal block
Power Consumption 1 Watts (Not include PD's device)
PoE Power Budget 30Watt at 9~24VDC, 60Watt at 24~57VDC
Protection  
Short Circuit Protection Present
Over Load Protection Present
Physical Characteristics  
Enclosure IP-30
Dimensions (W x D x H) 41(W)x70(D)x95(H)mm (1.03 x 2.76 x 3.74 inch)
Weight (g) 318 g
Environmental  
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -40 to 75°C (-40 to 167°F)
Operating Humidity 5% to 95% Non-condensing
Regulatory Approvals  
EMC CE EMC (EN55024,EN 55032), FCC Part 15 B
EMI EN55032, CISPR 32, EN61000-3-2, EN61000-3-3, FCC Part 15 B class A
EMS EN55024 (IEC/EN 61000-4-2 (ESD), IEC/EN 61000-4-3 (RS), IEC/EN 61000-4-4 (EFT), IEC/EN61000-4-5 (Surge), IEC/EN 61000-4-6 (CS), IEC/EN 61000-4-8 (PFMF), IEC/EN 61000-4-11 (DIP)
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
MTBF 2067004hrs
Warranty 5 years

*Note1: (1) By default, the output value of the high power PoE++ is in Sync mode which supports PoE af/at-compliant P.D. devices.

(2) If you cannot enable the 60W PTZ camera, please set the DIP switch to Async mode and reconnect power. This mode only supports Dual P.D mode. You may not connect to an af/at-compliant P.D. device with this mode.

Model Name Description
INJ-101GT++-60W-24V Industrial 1-port Gigabit High Power PoE++ Injector, 9 to 57VDC
INJ-101GT++-60W Industrial 1-port Gigabit High Power PoE++ Injector
  • Download

    guests member partner
    DatasheetPreviewVersionRelease dateSize 
    DataSheet_INJ-101GT++-60W-24V.pdfNoV1.0Jul 27, 2018890.06KB

    QIGPreviewVersionRelease dateSize 
    QIG_ INJ-101GT++-60W-24V.pdfNoV1.0Jul 27, 2018459.85KB

  • Guests Member Partner
    Datasheet Preview Version Release Date Size Download
    DataSheet_INJ-101GT++-60W-24V.pdfNoV1.0Jul 27, 2018890.06KB
    QIG Preview Version Release Date Size Download
    QIG_ INJ-101GT++-60W-24V.pdfNoV1.0Jul 27, 2018459.85KB

    ORing is committed to provide world-class product, strong technical support team for technical consulting and best after-sale service.

    Copyright © 2020 ORing Industrial Networking Corp. All Rights Reserved.