Products

Overview

IDS-4312D+ is an innovative secure 1 port RS-232/422/485 to 802.11 b/g/n WLAN, up to 150 Mbps, and 2 port LAN device server with standard features of device server, such like TCP/IP interface and versatile operation modes: Virtual Com, Serial Tunnel, TCP Server, TCP Client, and UDP.  In addition, the Windows untility, DS-Tool, could configure multiple devices and set up the mappings of Virtual Com. On the other hand, IDS-4312D+ can simultaneously transfer data up to 5 redundant host PCs to aovid Ethernet connection breakdown or any host PC fails.  Further, IDS-4312D+ features HTTPS, SSH, and SSL encryption to assure the security of critical data transmission.

IDS-4312D+ supports RS-232/422/485 and provides dual redundant power inputs, 12~48 VDC, on terminal block to guarantee a non-stop operation. Further, IDS-4312+ features PoE PD (Power Device) function, compliant with IEEE802.3af standard, with 1kv isolation on the PoE port. With wide operating temperature, -25~70^oC, and rugged IP-30 housing design, IDS-4312D+ series could operate in the harsh industrial environment. Therefore, IDS-4312D+ is the best solution to the high demand of secure serial to Ethernet critical data communication.

Features

• • High Speed Air Connectivity: WLAN interface support up to 150 Mbps link speed
  • Support 2x 10/100Base-T(x) Ethernet ports
  • Support 1x DI and 1x DO
  • Support ORing Open Gateway (protocol converter) software feature for user-friendly IIoT deployment
  • Operating Modes: Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP
  • Support Modbus TCP/RTU industrial protocols
  • Support MQTT/MQTT Sparkplug B/CoAP/LWM2MCloud protocols
  • PoE power input available with 1kV isolation
  • Security: SSL data encryption; secured management by HTTPS and SSH: IP Access: IP White List
  • Event Warning by Syslog, Email, SNMP trap
  • Configurable by Web-based and Windows utility (DS-Tool)
  • Various Windows O.S. supported: Windows NT/2000/ XP/ 2003/VISTA(32/64bit)/ Windows 7(32/64bit)
  • 1KV isolation for PoE PD port (IDS-4312D+)

Specification

Specifications ORing Device Server Model IDS-4312ID+ Physical Ports   10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX 2 PoE Feature P.O.E.Present at ETH1 Power Device (IEEE 802.3af): IEEE 802.3af compliant input interface Over load & short circuit protection Isolation Voltage: 1000 VDC min. Isolation Resistance : 108 ohms min DI/DO(Dry Contact) DI x 1, DO x 1  (DI :Logic level 1: 5V~30V, Logic level 0: 0V~2V  DO :Maximum Voltage is 30V, Maximum Current is 20mA) WLAN feature   Operation Mode Client Antenna and Connector 1 x External reverse SMA-type antenna connector Radio Frequency Type DSSS, OFDM Modulation IEEE802.11b: CCK, DQPSK, DBPSK IEEE802.11g/n: OFDM with BPSK, QPSK, 16QAM, 64QAM Frequency Band America / FCC: 2.412~2.462 GHz (11 channels ) Europe CE / ETSI: 2.412~2.472 GHz ( 13 channels ) Transmission Rate 802.11b: 1/2/5.5/11 Mbps 802.11g: 6/9/12/18/24/36/48/54 Mbps 802.11n(40MHz): UP to 150 Mbps Transmit Power 802.11b: 13.5dBm ± 1.5dBm 802.11g: 13.5dBm ± 1.5dBm 802.11n(2.4G@20MHz): 13.5dBm ± 1.5dBm 802.11n(2.4G@40MHz): 13.5dBm ± 1.5dBm Receive Sensitivity 802.11b: -90dBm ± 2dBm@1Mbps 802.11g: -72dBm ± 2dBm@54Mbps 802.11n(2.4G@40MHz,MCS7): -68dBm ± 2dBm Encryption Security WEP: (64-bit, 128-bit key supported) WPA/WPA2:802.11i (WEP and AES encryption) WPA-PSK (256-bit key pre-shared key supported) 802.1X Authentication supported  Serial Ports   Connector DB9(male) x 1 Operation Mode RS-232 /422 /485 Serial Baud Rate 110 bps to 460.8 Kbps Data Bits 7, 8 Parity odd, even, none, mark, space Stop Bits 1, 1.5, 2 RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND Flow Control XON/XOFF, RTS/CTS, DTR/DSR Network Features   Network Protocols ICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS, SNMP V1/V2c, HTTPS, SMTP LED Indicators   Power Indicator 3 x LEDs, PWR 1(2)(PoE): Green On: Power is on 10/100TX RJ45 port indicator Green for port Link/Act at 100Mbps.  Serial TX / RX LEDs Red : Serial port is receiving data Green : Serial port is transmitting data WLAN LED WLAN Link /ACT: Green: Blinking Digital I/O 2 x LEDs, Green On: active Power   Redundant Input power Dual DC inputs. 12-48VDC on 4-pin terminal block Power Consumption (Typ.) 7 W Max Overload Current Protection Present Reverse Polarity Protection Present on terminal block Physical Characteristics   Enclosure IP-30 Dimensions (W x D x H) 45 (W) x 81 (D) x 95 (H) mm Weight (g) 395 g Environmental   Storage Temperature -40 to 85oC (-40 to 185oF) Operating Temperature -25 to 70°C (-13 to 158°F) Operating Humidity 5% to 95% Non-condensing Regulatory Approvals   EMC CE EMC (EN 55024, EN 55032), FCC Part 15 B EMI EN 55032, CISPR32, EN 61000-3-2, EN 61000-3-3, FCC Part 15 B Class A EMS EN 55024, (IEC/EN 61000-4-2 (ESD), IEC/EN 61000-4-3 (RS), IEC/EN 61000-4-4 (EFT),IEC/EN 61000-4-5 (Surge), IEC/EN 61000-4-6 (CS), IEC/EN 61000-4-8(PFMF), IEC/EN 61000-4-11(DIP)) WIFI EN 301 489-1/-17(2.4G), EN 300 328(2.4G), FCC Par 15C(2.4G) Shock IEC60068-2-27 Free Fall IEC60068-2-31 Vibration IEC60068-2-6 Safety UL61010-1/-2-201 WTBF 381,084 hrs Warranty 5 years

Model Name	Description
IDS-4312D+_EU	Industrial 1 Secure Serial Port to IEEE 802.11 b/g/n wireless Device Server, 1-port PoE P.D., EU band
IDS-4312D+_US	Industrial 1 Secure Serial Port to IEEE 802.11 b/g/n wireless Device Server, 1-port PoE P.D., US band

Download

guests

member

partner

Datasheet	Preview	Version	Release date	Size
Datasheet_IDS-4312D+.pdf	See detail IDS-4312D+	V1.0	Jul 03, 2020	325.99KB

QIG	Preview	Version	Release date	Size
QIG_IDS-4312D+.pdf	See detail IDS-4312D+	V1.0	Dec 15, 2020	502.39KB

Datasheet	Preview	Version	Release Date	Size	Download
Datasheet_IDS-4312D+.pdf	See detail IDS-4312D+	V1.0	Jul 03, 2020	325.99KB

QIG	Preview	Version	Release Date	Size	Download
QIG_IDS-4312D+.pdf	See detail IDS-4312D+	V1.0	Dec 15, 2020	502.39KB