ad banner 1122

IGAP-610H+

Industrial WIFI4 Wireless AP with 1GE, PoE P.D

-10_70c.png802_11abgn.pngfull_gigabit.pngpoe_pd.pngpwr_redundant.pngx-roaming.png

Description

IGAP-610H+ is a reliable WLAN Access Point with 1 Ethernet Gigabit ports and IEEE 802.11 a/b/g/n wireless module.  It can be configured to operate in AP/Client/Repeater Mode. You are able to configure IGAP-610H+ by WEB interface via LAN port or WLAN interface. In addition, IGAP-610H+ also provides P.D. feature on Ethernet port which is fully compliant with IEEE802.3af PoE P.D. specification. Therefore, IGAP-610H+ is one of the best communication solutions for wireless applications on the industrial network.

Features

  •  High Speed Air Connectivity: Dual Band in IEEE 802.11 a/b/g/n and b/g/n WLAN interface selectable and support up to 300Mbps link speed
  •  12~48VDC power input on terminal block
  •  1 Gigabit Ethernet ports with 2KV isolation for PoE P.D.
  •  Highly Security Capability: WEP/WPA/WPA-PSK(TKIP,AES)/ WPA2/WPA2-PSK(TKIP,AES)/802.1X Authentication supported
  •  Support X-Roaming < 100 ms
  •  Support Multiple-SSID to 4 SSID with VLAN
  •  Support MAC Filter
  •  High transmission power (27 dBm Max.)
  •  High data throughputwith HT40 2x2 MIMO
  •  Support Long Distance Air Connectivity
  •  Support AP/Client/Repeater
  •  Wireless connecting status monitoring
  •  Secured Management by HTTPS
  •  Event Warning by Syslog, Email, SNMP Trap, and Relay output
  •  Rigid IP-30 housing design
  •  DIN-Rail and Wall-mount enabled

Physical ports

10/100/1000Base-T(X) ports in RJ451
PoE P.D. PortPresent at ETH1
Fully compliant with IEEE 802.3af Power Device specification
Over load & short circuit protection
Isolation Voltage: 2000 VDC min.
Isolation Resistance : 10⁸ ohms min

LED Indicators

WIFI(WLAN) Indicator3 x LEDs signal quality 75%, 50% 25%
1 x Green for WLAN Link /Act
Power indicator3 x LEDs, P1, P2, PoE:
Green On : Power is on and functioning Normal
System Indicator (Status)1 x LED, Blink for system booting, Solid for system ready.
10/100/1000Base-T(X) RJ45 port indicator2 x LEDs,
LNK/ACT:Green for port Act.
Speed: Green for port Link at 1000Mbps
Amber for port Link at 100Mbps.
Off for port Link at 10Mbps

Power

Power consumption (Typ.)7W
Redundant Input powerDual DC inputs. 12~48VDC on 4-pin terminal block
Overload current protectionPresent
Reverse polarity protectionPresent on the terminal block

WLAN Interface

Operating ModeAP/Client/Repeater
Antenna ConnectorReverse SMA Female
ModulationIEEE802.11a: OFDM
IEEE802.11b: CCK/DQPSK/DBPSK
IEEE802.11g: OFDM
IEEE802.11n: BPSK, QPSK, 16-QAM, 64-QAM
Frequency BandAmerica/FCC: 2.412~2.462 GHz (11 channels)
5.180~5.240 GHz & 5.745~5.825 GHz ( 9 channels )
Europe CE/ETSI: 2.412~2.472 GHz (13 channels)
5.180~5.240 GHz ( 4 channels )
Transmission Rate802.11b: 11, 5.5, 2, 1 Mbps;
802.11a/g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps
802.11n: up to 300Mbps
Transmit Power802.11a: 23dBm ± 1.5dBm@6Mbps, 21dBm ± 1.5dBm@54Mbps
802.11b: 23dBm ± 1.5dBm@1Mbps, 23dBm ± 1.5dBm@11Mbps
802.11g: 23dBm ± 1.5dBm@6Mbps, 21dBm ± 1.5dBm@54Mbps
802.11gn HT20: 20dBm ± 1.5dBm@MCS7, 802.11gn HT40: 20dBm ± 1.5dBm @MCS7
802.11an HT20: 20dBm ± 1.5dBm@MCS7, 802.11an HT40: 20dBm ± 1.5dBm @MCS7
Receiver Sensitivity802.11a : -93dBm ± 2dBm@6Mbps, -74dBm ± 2dBm@54Mbps
802.11b : -98dBm ± 2dBm@1Mbps, -90dBm ± 2dBm@11Mbps
802.11g : -90dBm ± 2dBm@6Mbps, -77dBm ± 2dBm@54Mbps
802.11gn HT20:-74dBm ± 2dBm@MCS7, 802.11gn HT40:-71dBm ± 2dBm@MCS7
802.11an HT20:-71dBm ± 2dBm@MCS7, 802.11an HT40:-68dBm ± 2dBm@MCS7
Encryption SecurityWEP: (64-bit ,128-bit key)
WPA/WPA2 PSK :TKIP and AES encryption (802.11i)
802.1X/RADIUS Authentication supported

Protocol Support

ProtocolARP, BOOTP, DHCP, DNS, HTTP, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, STP, RSTP

Physical Characteristic

EnclosureIP-30
Dimensions (mm)45 (W) x 95 (D) x 115 (H)
Weight (g)375

Environmental

Storage Temperature-40 to 85°C (-40 to 185°F)
Operating Temperature-10 to 70°C (14 to 158°F)
Operating Humidity5% to 95% Non-condensing

Warranty

Warranty5 years

Downloads

DatasheetVersionChecksumRelease DateRelease NoteSize
IGAP-610H+ Datasheet7月 06, 2023664.48 kB

QIGVersionChecksumRelease DateRelease NoteSize
IGAP-610H+ Quick Installation Guide7月 06, 2023469.42 kB

User ManualVersionChecksumRelease DateRelease NoteSize
IGAP-610H+ User Manual7月 06, 20231.53 MB

CertificationVersionChecksumRelease DateRelease NoteSize
IGAP-610H+ Certification7月 06, 2023182.70 kB

FirmwareVersionChecksumRelease DateRelease NoteSize
IGAP-610H+ Firmware 7月 15, 20258.88 MB

Regulatory Approvals

EMCCE EMC (EN 55024, EN 55032), FCC Part 15B
EMIEN 55032, CISPR32, EN 61000-3-2, EN 61000-3-3, FCC Part 15B class A
EMSEN 55024 (IEC/EN 61000-4-2 (ESD), IEC/EN 61000-4-3 (RS), IEC/EN 61000-4-4 (EFT), IEC/EN 61000-4-5 (Surge), IEC/EN 61000-4-6 (CS), IEC/EN61000-4-8(PFMF), IEC/EN 61000-4-11(DIP))
ShockIEC60068-2-27
Free FallIEC60068-2-31
VibrationIEC60068-2-6
SafetyEN60950-1
MTBF211477 hrs

Dimensions