ORing offers a comprehensive portfolio of rugged industrial Ethernet switches, from cost-effective unmanaged and PoE models to advanced Layer 2/3 managed switches enabling precise control. Our switches can address connectivity needs in a variety of vertical markets.
IES-3162GC is the managed Redundant Ring Ethernet switch with 16x10/100Base-T(X) ports and 2xgigabit combo ports. With complete support of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection), Open-Ring, and MSTP/RSTP/STP (IEEE 802.1s/w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. All function of IES-3162GC can be managed centralized and convenient by a powerful windows utility - Open-Vision. In addition, the wide operating temperature range from -40 to 70°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application.
*NOTE: This function is available by request only
Physical ports | |
---|---|
10/100Base-T(X) ports in RJ45 | 16 |
Gigabit Combo ports with 10/100/1000Base-T(X) RJ45 and 100/1000Base-X SFP ports | 2 |
RS-232 Serial Console port | RS-232 in RJ45 connector with console cable. 9600bps, 8, N, 1 |
LED Indicators | |
---|---|
Power Indicator (Power) | Green: Power LED x 3 |
Ring Master Indicator (R.M.) | Green: Indicates that the system is operating in O-Ring Master mode |
O-Ring Indicator (Ring) | Green: Indicates that the system operating in O-Ring mode Green Blinking: Indicates that the Ring is broken. |
Fault Indicator (Fault) | Amber: Indicate unexpected event occurred |
10/100Base-T(X) RJ45 Port Indicator | Green for Link/Act indicator: On for link-up, Off for link-down, Blinking for act. Amber for Duplex/Collision indicator: On for full-duplex, Off for half-duplex, Blinking for half-duplex and collision occurred. |
100/1000Base-X SFP Port With Combo Port Indicator | Green for Link/Act indicator: On for link-up, Off for link-down, Blinking for act. |
Power | |
---|---|
Power consumption (Typ.) | 15 Watts |
Redundant Input power | Dual DC inputs, 12~48VDC on 6-pin terminal block |
Overload current protection | Present |
Reverse polarity protection | Present |
Protection / Certification | |
---|---|
Safety | IEC/EN 62368-1, UL 61010-1, UL 61010-2-201 |
Physical Characteristic | |
---|---|
Enclosure | IP-30 Aluminum |
Dimensions (mm) | 96.4 (W) x 108.5 (D) x 154 (H)mm3.8 (W) x 4.27 (D) x 6.06 (H) inch |
Weight (g) | 1220 g |
Technology | |
---|---|
Ethernet Standards | IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX and 100Base-FX IEEE 802.3z for 1000Base-X IEEE 802.3ab for 1000Base-T IEEE 802.3x for Flow control IEEE 802.3ad for LACP (Link Aggregation Control Protocol) IEEE 802.1D for STP (Spanning Tree Protocol) IEEE 802.1p for COS (Class of Service) IEEE 802.1Q for VLAN Tagging IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol) IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol) IEEE 802.1x for Authentication IEEE 802.1AB for LLDP (Link Layer Discovery Protocol) |
MAC Table | 8K |
Packet buffer Size | 1Mb |
Priority Queues | 4 |
Processing | Store-and-Forward |
Switch Properties | Switching latency: 2.28 us Switching bandwidth: 7.2Gbps Max. Number of Available VLANs: 4096 VLAN ID Range: VID 1 to 4095 IGMP multicast groups: 1024 Port rate limiting: User Define |
Security Features | Enable/disable ports, MAC based port security Port based network access control (802.1x) VLAN (802.1Q) to segregate and secure network traffic Supports Q-in-Q VLAN for performance & security to expand the VLAN space Radius centralized password management SNMP V1/V2c/V3 encrypted authentication and access security |
Software Features | STP/RSTP/MSTP (IEEE 802.1D/w/s) Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units TOS/Diffserv supported Quality of Service (802.1p) for real-time traffic VLAN (802.1Q) with VLAN tagging and GVRP supported IGMP Snooping for multicast filtering Port configuration, status, statistics, monitoring, security SNTP for synchronizing of clocks over network Support PTP Client (Precision Time Protocol) clock synchronization DHCP Server / Client support Port Trunk support MVR (Multicast VLAN Registration) support Modbus TCP |
Network Redundancy | O-Ring O-Chain MRP MSTP/RSTP/STP |
Warning / Monitoring System | Relay output for fault event alarming Syslog server / client to record and view events Include SMTP for event warning notification via email Event selection support |
Fault contact | |
---|---|
Relay | Relay output to carry capacity of 1A at 24VDC |
Reset Function | |
---|---|
Reset Button | 5 sec: Factory default |
Environmental | |
---|---|
Storage Temperature | -40 to 85oC (-40 to 185oF) |
Operating Temperature | -40 to 75oC (-40 to 167oF) |
Operating Humidity | 5% to 95% Non-condensing |
Warranty | |
---|---|
Warranty | 5 years |
Downloads |
|
---|
Regulatory Approvals | ||
---|---|---|
EMC | CE EMC (EN 55035, EN 55032), FCC Part 15 B | |
EMI | EN 55032, EN 61000-6-4, CISPR32, EN 61000-3-2, EN 61000-3-3, FCC Part 15 B class A | |
EMS | EN 55035 (IEC/EN 61000-4-2 (ESD), IEC/EN 61000-4-3 (RS), IEC/EN 61000-4-4 (EFT), IEC/EN 61000-4-5 (Surge), IEC/EN 61000-4-6 (CS), IEC/EN 61000-4-8(PFMF), IEC/EN 61000-4-11 (DIP)) | |
Shock | IEC60068-2-27 | |
Free Fall | IEC60068-2-31 | |
Vibration | IEC60068-2-6 | |
Safety | IEC/EN 62368-1, UL 61010-1, UL 61010-2-201 | |
MTBF | 600504.1569 hrs. |
Dimensions |
---|