Description
ORing’s TransporterTM series PoE Injectors are designed for industrial applications, such as rolling stock, vehicle, and railway applications. The TINJ-101-M12-24V PoE Injector is an advanced IEEE802.3at compliant device with Intelligent Detection that provided 1-port 10/100 Base-T(X) PoE output which is compliant with EN50155 requirement. It is specifically designed for the toughest industrial environments. TINJ-101-M12-24V EN50155 PoE Injector use M12 connectors to ensure tight, robust connections, and guarantee reliable operation against environmental disturbances, such as vibration and shock. The device does not turn on power until it detects a valid PoE signature from the PoE devices attached downstream on the Ethernet cable. This protection against damage to non-PoE compliant equipment which may be connected to the Ethernet cable. Because of this intelligent detection, only an IEEE 802.3at/802.3af compliant device can be powered with the TINJ-101-M12-24V PoE Injector. Typically, in Ethernet networks the maximum allowable CAT5 cable length is about 100 meters, due to the limitation of the Ethernet standards. Because of its 50V insertion, the installer doesn’t need to worry about voltage drops caused by cable length. The TINJ-101-M12-24V PoE Injector can function with any PoE P.D. equipment which is fully compliant with the IEEE 802.3at/802.3af PoE standards.
Features
- PoE+Injector for 1x10/100 Base-T(X)
- Fully compliant with IEEE802.3at/802.3af standard
- Auto protection for Over Voltage Power Input and over current output
- Supports Power Output up to 30Watts
- Supports Power wide Input range from 12Vdc to 57 Vdc
- Ultra-rugged enclosure M12 connector for toughest industrial usages
- Wall mounting enabled
EN50155 Industrial 1-port FET PoE Injector with 30W output, 24VDC Input, M12 connector
Physical ports |
|---|
| 10/100Base-T(X) ports in M12 | 1 x M12 connectors (4-pin D-coding, female) |
| 10/100Base-T(X) ports with P.S.E. in M12 | 1 x M12 connectors (4-pin D-coding, female) |
LED Indicators |
|---|
| Power Indicator (Power) | Green: Power LED x 1
Green On: Power is on and functioning Normally. |
| PoE Indicator | 1 x LED
Blue On: PoE Device Link
Blue Blinking: Detecting PoE Device
Blue Off: None PoE Device Detected
|
Power |
|---|
| PoE Output Power | IEEE 802.3af: 15.4 Watts / IEEE 802.3at: 30 Watts Max. |
| Redundant Input power | Railway 24VDC (12 ~ 57VDC) on 5-pin M12 female A-coding |
| Overload current protection | Present |
| Reverse polarity protection | Present |
Protection / Certification |
|---|
| Safety | EN 60950-1 |
Physical Characteristic |
|---|
| Enclosure | IP-40, Iron |
| Dimensions (mm) | 88.9 (W) x 40 (D) x 178.2 (H)mm3.5 (W) x 1.57 (D) x 7.02 (H) inch |
| Weight (g) | 446 g |
Environmental |
|---|
| Storage Temperature | -40 to 85℃ (-40 to 185℉) |
| Operating Temperature | -40 to 75℃ (-40 to 167℉) |
| Operating Humidity | 5% to 95% Non-condensing |
Regulatory Approvals |
|---|
| EMC | CE EMC (EN 55035, EN 55032), FCC Part 15 B, EN 50121-3-2(EN 50155) |
| EMI | EN 55032, CISPR32, EN 61000-3-2, EN 61000-3-3, FCC Part 15 B class A |
| EMS | EN 55035 (IEC/EN 61000-4-2 (ESD), IEC/EN 61000-4-3 (RS), IEC/EN 61000-4-4 (EFT),
IEC/EN 61000-4-5 (Surge), IEC/EN 61000-4-6 (CS), IEC/EN 61000-4-8(PFMF), IEC/EN 61000-4-11 (DIP)) |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-31 |
| Vibration | IEC60068-2-6 |
| Safety | EN 60950-1 |
| Other | EN 50155 |
| MTBF | 3513152 hrs. |
Dimensions |
|---|
 |
ORing offers a comprehensive portfolio of rugged industrial Ethernet switches, from cost-effective unmanaged and PoE models to advanced Layer 2/3 managed switches enabling precise control. Our switches can address connectivity needs in a variety of vertical markets.
