ORing offers a comprehensive portfolio of rugged industrial Ethernet switches, from cost-effective unmanaged and PoE models to advanced Layer 2/3 managed switches enabling precise control. Our switches can address connectivity needs in a variety of vertical markets.
INJ-102GT-24V
2-port Gigabit PoE Injector, IEEE 802.3af/at, 12-57VDC
Description
The INJ-102GT-24V PoE Injector is not only an IEEE802.3at compliant device with intelligent detection that provided 2-ports 10/100/1000Base-T(X) PoE outputs. The device does not turn on power until it detects a valid PoE signature from the PoE devices attached downstream on the Ethernet cable. This protection against damage to non-PoE compliant equipment which may be connected to the Ethernet cable. Because of this intelligent detection, only an IEEE 802.3at/af compliant device can be powered with the INJ-102GT-24V PoE Injector. Typically in Gigabit networks the maximum allowable CAT5 cable length is about 100 meters, due to the limitation of the Ethernet standards. Because of its 12~57V insertion, the installer doesn't need to worry about voltage drops caused by cable length. The INJ-102GT-24V PoE Injector can function with any PoE P.D. equipment which is fully compliant with the IEEE 802.3at/af PoE standards.
Note: P.D. side must be fully compliant IEEE 802.3at/af standard in order for the power supply to be able to sense the PoE devices signature and apply power. Power is supplied on Ethernet pins 1/2 (V+) and 3/6 (V-).
Features
- PoE+Injector for 1x10/100/1000 Base-T(X)
- Fully compliant with IEEE802.3at/802.3af
- Auto protection for over voltage power input and over current output
- Power output up to 30Watts per port
- Wide power Input from 12VDC to 57VDC
- IP-30 rugged case design
- DIN-Rail and wallmount design
Downloads |
| ||
|---|---|---|---|
Dimensions |  |
|---|