IGPS-P9084GP-LA

Industrial IEC 61850-3 12-port Managed Gigabit PoE Switch with 8G/PSE and 4G SFP socket

-40_75c.pngfull_gigabit.pngo-ring.pngpwr_redundant.png

Description

The IGPS-P9084GP-LA is a 12-port managed industrial Gigabit PoE Ethernet switch designed for power substations and other mission-critical industrial networks. Compliant with IEC 61850-3 and IEEE 1613, it features 8 Gigabit IEEE 802.3at PoE+ ports delivering up to 30W per port, with a total PoE power budget of 240W, and 4 additional 100/1000Base-X SFP ports for fiber connectivity.

To ensure reliable network communication, the IGPS-P9084GP-LA supports multiple Ethernet redundancy protocols, including O-Ring with recovery times under 20ms across up to 250 nodes, MRP, and MSTP (RSTP/STP compatible). It also supports IEEE 1588v2 time synchronization, VLAN, QoS, and SNMP-based network management. With a rugged IP30 fanless design and a wide operating temperature range of −40°C to +75°C, the switch is well suited for demanding power utility and industrial automation environments.

Features

  • Compliant with IEC 61850-3 and IEEE 1613 standards for power substation applications
  • 8 × 10/100/1000Base-T(X) IEEE 802.3at PoE+ ports, delivering up to 30W per port
  • 4 × 100/1000Base-X SFP ports for flexible fiber connectivity
  • Total PoE power budget of up to 240W
  • IEEE 1588v2 time synchronization
  • O-Ring redundancy with recovery times under 20ms across up to 250 nodes
  • Supports O-Chain, IEC 62439-2 MRP, and MSTP/RSTP/STP redundancy protocols
  • Intelligent PoE management with scheduled power control, alive check, and automatic reboot
  • Supports IPv6, EtherNet/IP, Modbus TCP, VLAN, QoS, and IGMP snooping
  • Secure network access with HTTPS, SSH, ACL, TACACS+, IEEE 802.1X, and Device Binding
  • DoS/DDoS prevention and SNMPv3-based network management
  • Flexible management via Web GUI, SNMP, CLI, and Open-Vision
  • Syslog and SNMP Trap notifications for network event monitoring
  • Configuration backup and restoration via optional DBU-01 module
  • Wide operating temperature range of −40°C to +75°C
  • Rugged IP30 fanless design

Physical ports

Total Ethernet Ports12
Gigabit PoE Ports8 x 10/100/1000Base-T(X) RJ45, 802.3at
Gigabit Fiber/SFP Ports4 x 100/1000Base-X SFP

Power

Power consumption (Typ.)13.2 Watts for system only
PoE Output PowerPer port 56V DC, 350mA. Max. 15.4 watts (IEEE 802.3af)
Per Port 56V DC, 590mA. Max. 30 watts (IEEE 802.3at)
Connector6-pin terminal block
Redundant Input power50/57VDC
Total PoE Output Power240W max, 30W/per port
Overload current protectionPresent

Physical Characteristic

EnclosureIP-30
Dimensions (mm)54.3 (W) x 108.3 (D) x 145.1 (H) mm (2.13 x 4.26 x 5.71 inches)
Weight (g)779g

Technology

Ethernet StandardsIEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3ab for 1000Base-T
IEEE 802.3z for 1000Base-X
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol )
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1D for STP (Spanning Tree Protocol)
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
MAC Table8k
Packet buffer Size4Mbit
Priority Queues8
ProcessingStore-and-Forward
Switch PropertiesSwitching latency: 7 us
Switching bandwidth: 24Gbps
Throughput (packet per second) : 17.856Mpps@64Bytes packet
Max. Number of Available VLANs: 4096
VLAN ID Range : VID 0 to 4095
IGMP multicast groups: 256 for each VLAN
Port rate limiting: User Define
Jumbo frameUp to 9.6K Bytes
Security FeaturesDevice Binding security feature
Enable/disable ports, MAC based port security
Port based network access control (802.1x)
VLAN (802.1Q ) to segregate and secure network traffic
Radius centralized password management
SNMPv3 encrypted authentication and access security
Https / SSH enhance network security
Software FeaturesSTP/RSTP/MSTP (IEEE 802.1D/w/s)
Redundant Ring (O-Ring) with recovery time less than 20ms over 250 units
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging
IGMP Snooping
IP-based bandwidth management
Application-based QoS management
DOS/DDOS auto prevention
Port configuration, status, statistics, monitoring, security
DHCP Server/Client/Relay
SMTP Client
Modbus TCP
EtherNet/IPTM
Network RedundancyO-Ring
Open-Ring
O-Chain
MRP
MSTP (RSTP/STP compatible)

Fault contact

RelayRelay output to carry capacity of 1A at 24VDC

Reset Function

Reset Buttonless than 5 sec: System reboot, greater than 5 sec: Factory default

Environmental

Storage Temperature-40 to 85 degrees C (-40 to 185 degrees F)
Operating Temperature-40 to 75 degrees C (-40 to 167 degrees F )
Operating Humidity5% to 95% Non-condensing

Warranty

Warranty5 years

Downloads

DatasheetVersionChecksumRelease DateRelease NoteSize
DataSheet_IGPS-P9084GP-LAOctober 20, 2025693.04 kB

User ManualVersionChecksumRelease DateRelease NoteSize
Firmware S12.x Function Manualv1.2August 22, 20254.01 MB

Regulatory Approvals

EMCCE EMC (EN 55035, EN 55032)
FCC Part 15 B
EMIEN 55032
CISPR32
EN 61000-3-2
EN 61000-3-3
FCC Part 15 B class A
EMSIEC/EN 61000-4-2
IEC/EN 61000-4-3 (RS)
IEC/EN 61000-4-4
IEC/EN 61000-4-5
IEC/EN 61000-4-6 (CS)
IEC/EN 61000-4-8 (PFMF)
ShockIEC 60068-2-27
Free FallIEC 60068-2-31
VibrationIEC 60068-2-6
SafetyEN62368-1
OtherIEC 61850-3
IEEE 1613
MTBF602,954 hrs

Dimensions