IES-3240

IES-3240

24FE Managed Ethernet Switch

-40_70c.pngo-ring.pngpwr_redundant.png

Description

IES-3240 is an managed Redundant Ring Ethernet switch with 24x10/100Base-T(X) ports. With complete support of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection), Open-Ring and MSTP/RSTP/STP (IEEE 802.1s/w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. All function of IES-3240 can be managed centralized and convenient by a powerful windows utility — Open-Vision. In addition, the wide operating temperature range from -40 to 70°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choice for highly-managed Ethernet application.

Features

  •  Fastest Redundant Ethernet Ring : O-Ring (recovery time < 10ms over 250 units of connection)
  •  Open-Ring supports the other vendor’s ring technology in open architecture
  •  O-Chain allow multiple redundant network rings
  •  *note Support standard IEC 62439-2 MRP (Media Redundancy Protocol) function
  •  Support Modbus TCP protocol
  •  STP/RSTP:2004/MSTP supported
  •  Supports PTP Client (Precision Time Protocol) clock synchronization
  •  IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic
  •  Port Trunking for easy of bandwidth management
  •  Support IPV6 new internet protocol version
  •  Provided HTTPS/SSH protocol to enhance network security
  •  Support TACACS+ and 802.1x User Authentication for security

       *NOTE: This function is available by request only


IES-3240
Industrial 24-port managed Ethernet switch with 24x10/100Base-T(X)

Physical ports

10/100Base-T(X) ports in RJ4524
RS-232 Serial Console portRS-232 in RJ45 connector with console cable. 9600bps, 8, N, 1

LED Indicators

Power Indicator (Power)Green: Power LED x 3
Ring Master Indicator (R.M.)Green: Indicates that the system is operating in O-Ring Master mode
O-Ring Indicator (Ring)Green: Indicates that the system operating in O-Ring mode
Green Blinking: Indicates that the Ring is broken.
Fault Indicator (Fault)Amber: Indicate unexpected event occurred
10/100Base-T(X) RJ45 Port IndicatorGreen for Link/Act indicator: On for link-up, Off for link-down, Blinking for act.
Amber for Duplex/Collision indicator: On for full-duplex, Off for half-duplex, Blinking for half-duplex and collision occurred.

Power

Power consumption (Typ.)15 Watts
Redundant Input powerDual DC inputs, 12~48VDC on 6-pin terminal block
Overload current protectionPresent
Reverse polarity protectionPresent

Protection / Certification

SafetyIEC/EN 62368-1, UL 61010-1, UL 61010-2-201

Physical Characteristic

EnclosureIP-30 Aluminum
Dimensions (mm)96.4 (W) x 108.5 (D) x 154 (H)mm3.8 (W) x 4.27 (D) x 6.06 (H) inch
Weight (g)1052 g

Technology

Ethernet StandardsIEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol)
IEEE 802.1D for STP (Spanning Tree Protocol)
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
MAC Table8K
Packet buffer Size1Mb
Priority Queues4
ProcessingStore-and-Forward
Switch PropertiesSwitching latency: 2.96 us
Switching bandwidth: 4.8Gbps
Max. Number of Available VLANs: 4096
VLAN ID Range: VID 1 to 4095
IGMP multicast groups: 1024
Port rate limiting: User Define
Security FeaturesEnable/disable ports, MAC based port security
Port based network access control (802.1x)
VLAN (802.1Q) to segregate and secure network traffic
Supports Q-in-Q VLAN for performance & security to expand the VLAN space
Radius centralized password management
SNMP V1/V2c/V3 encrypted authentication and access security
Software FeaturesSTP/RSTP/MSTP (IEEE 802.1D/w/s)
Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging and GVRP supported
IGMP Snooping for multicast filtering
Port configuration, status, statistics, monitoring, security
SNTP for synchronizing of clocks over network
Support PTP Client (Precision Time Protocol) clock synchronization
DHCP Server / Client support
Port Trunk support
MVR (Multicast VLAN Registration) support
Modbus TCP
Network RedundancyO-Ring
O-Chain
MRP
MSTP/RSTP/STP
Warning / Monitoring SystemRelay output for fault event alarming
Syslog server / client to record and view events
Include SMTP for event warning notification via email
Event selection support

Fault contact

RelayRelay output to carry capacity of 1A at 24VDC

Reset Function

Reset Button 5 sec: Factory default

Environmental

Storage Temperature-40 to 85oC (-40 to 185oF)
Operating Temperature-40 to 75oC (-40 to 167oF)
Operating Humidity5% to 95% Non-condensing

Warranty

Warranty5 years

Downloads

UserManualVersionRelease DateSize
IES-3240 User ManualJuly 06, 20232.09 MB

DatasheetVersionRelease DateSize
IES-3240 DatasheetJuly 06, 2023389.15 kB

FirmwareVersionRelease DateSize
IES-3240 FirmwareJuly 06, 20231.03 MB

QIGVersionRelease DateSize
IES-3240 Quick Installation GuideJuly 06, 2023864.09 kB

Regulatory Approvals

EMCCE EMC (EN 55035, EN 55032), FCC Part 15 B
EMIEN 55032, EN 61000-6-4, CISPR32, EN 61000-3-2, EN 61000-3-3, FCC Part 15 B class A
EMSEN 55035 (IEC/EN 61000-4-2 (ESD), IEC/EN 61000-4-3 (RS), IEC/EN 61000-4-4 (EFT), IEC/EN 61000-4-5 (Surge), IEC/EN 61000-4-6 (CS), IEC/EN 61000-4-8(PFMF), IEC/EN 61000-4-11 (DIP))
ShockIEC60068-2-27
Free FallIEC60068-2-31
VibrationIEC60068-2-6
SafetyIEC/EN 62368-1, UL 61010-1, UL 61010-2-201
MTBF731289.4169 hrs.

Dimensions